SUPER TRAD 301 SO DIGIT
SUPER TRAD 301 SO DIGIT

 


CUTTING CAPACITY

                              
255 250 300 x 220
45° R 200 190 190 x 170
45° L 160 160 190 x 100 - 150x170
60° R 110 110 110 x 130

 


New band saw semi-automatic hydraulic THOMAS SUPER TRAD 301 SO DIGIT.
Suitable for cutting metal profiles and solid materials (construction steels in general, quenched and tempered steels, stainless steels, aluminum and brass). Easy to use, great robustness and reliability.
Possibility of cutting from 0° to 60° to the right and up to 45° to the left.
Two blade rotation speed 33 or 66 m/min. With the application of the INVERTER (on request) the rotation of the blade may vary from 20 up to 105 m/min.
Possibility to switch between automatic cutting mode to manual cutting mode.
Adjustable sawframe downfeed speed controlled by hydraulic regulator.
New electronic control device with color screen "Touch Screen" with the following functions:
 
- Counting of cut pieces (programmable piece-counter).
- Counting hours of partial and total work.
- Programmable cutting cycle (customization of the cutting cycle).
- Switching from automatic cutting cycle to manual cutting mode.
- Notification of status and error messages.
- Viewing of motor absorption (with Inverter option).
- Display of the blade rotation speed (with Inverter option).
- Interface Language selection (Italian - English - French - German - Spanish - more on request)

 
Semi-automatic cutting cycle:
When you start the cutting cycle the saw automatically performs the following functions:
Closing of the vice and start of blade rotation; sawframe downfeed until the completion of the cut; stopping rotation of the blade; sawframe return to the starting position; vice opening.
 
Manual cutting mode:
Clamping of the material to be cut via switch on the control panel; Start of the blade rotation by a gripswitch on the sawframe and manual pull down until the completion of the cut; stopping of blade rotation to release as soon as the gripswitch is released; vice opening via switch on the control panel.


TECHNICAL FEATURES
Construction in massive cast iron for high performance of cutting sections up to 255mm in diameter.
Round working table (rotating plateau) allowing to make inclined cuts without being scratched. It is also protected from the intrusion of chips and seizing due to rust.
Supporting structure of the cutting machine consists in carpentry with large thicknesses and sizes. Vice, rotation device and sawframe group consisting of cast iron to ensure maximum strength and extreme rigidity during use.
Blade-guide unit consisting of hard metal pads in tungsten carbide with driving in bearings for a perfect blade running and the cutting perpendicularity. High-quality anti-corrosion treatment on the components of the blade-guide assembly to provide greater durability and guarantee perfect cuts.
Rapid approach of the vise by means of specific lever actuating and positioning of the same, both on the right and left side of the blade, with the locking system.
Tensioning of the blade via manual hand wheel and machine stop microswitch if the blade breaks.
Electric pump with high capacity for an abundant lubrication during the cutting phase. On request, pneumatic spray micro-mist lubricating oil pump.
Safety microswitch on opening sawframe protection.
Brush for the removal of the chips from the blade.
Selection of start from pedal cutting cycle, or by button on the control panel.
Water gun to clean the working table.
From the workplace, the operator has a clear view of the machine and can easily keep tabs on all of the performance stages of processing.
The electro-hydraulic components are of first choice. Tests are performed rigorous testing on assembling mechanical and automation that ensure a high level of performance and functionality.
All Thomas saws are built in accordance with the EC Machinery Directive.


STANDARD EQUIPMENT
Bar-stop with millimeter scale for measuring the length of cut.
Work support bracket for the material to be cut.
Water gun to clean the working table.
HSS bi-metal blade 2750x27x0,9mm.
Set of service spanners.
Certificate of conformity and instruction manual according to Machinery Directive 2006/42 / EC.


OPTIONAL EQUIPMENT
INVERTER for cutting speed from 20 to 105 m/min.
Pneumatic spray micro-mist lubricating oil pump.
Roller table loading side 2 meters long (capacity 240 kg).
Roller table unloading side 2 meters long with a bar stop (capacity 240 kg).
Roller table loading side 2 meters long (capacity 1000 kg).
Roller table unloading side 2 meters long with a bar stop (capacity 1000 kg).


TECHNICAL SUPPORT
Telephone technical support directly from the company.
Service spare parts supply.

TECHNICAL DATA


3Ph Electric motor

kW

1 - 1.4

Electropump

kW

0.11

Gearbox reduction ration

I

40/1

Flywheel diameter

mm

300

Blade dimension

mm

2750 x 27 x 0,9

Cutting speed

m/1'

33/66

Vice opening

mm

305

Sawframe inclination

°

30

Working table height

mm

940

Machine dimension

mm

1200 x 2000 x 1950

Weight

kg

510

WITH INVERTER


3Ph Electric motor

kW

2.2

Blade speed

kW

20/105

 


 


 

 

    

© Sthemma S.r.l. - Cap Soc. 100.000,00 i.v. - P.iva / VAT IT 03753910243
Registro imprese VI-00163140247  - R.E.A. N. 93906/VICENZA

Privacy e Cookie Policy

We use cookies to provide a better experience for users browsing our website. By using the website, you agree to the use of cookies. OK