Semiautomatic double mitre bandsaw SUPER TRAD 380 SO EASY

NEW BANDSAWING MACHINE HIGH DUTY SUPER TRAD 380 SO EASY SEMI-AUTOMATIC HYDRAULIC
The saw SO EASY allows to make a complete cutting cycle without the constant presence of the operator through the original hydraulic control system for the descent of the sawframe, in nitely variable rate according to the type of material to be cut.
Limit switch to set the sawframe return just above the material to cut. Selector to switch to the MANUAL cutting mode. With button for the quick approach to the material to cut.
Centralized  control panel in the front of the machine including  luminous  alarm system. Automation is controlled by  safety  relay.
High e  ciency  hydraulic pump and low energy consumption. Practical and reliable for all cutting needs of small and medium-sized ferrous materials.
Large round working table “plateau” which turns with the blade mite- ring guaranteeing excellent support for the material to cut. This system prevents the blade from cutting the
working table as is the case with the conventional bandsaws.
Massive cast-iron vice with handwheel and quick locking lever. The vice is equipped with a practical handle for rapid movement and is mounted on a rail to allow lateral displacement.  Possibility  of cuts from 0° to 60° to the right and to 45° to the left.
Blade rotation with 2 electric speeds.
Blade tension by  hand  wheel and safety microswitch in case of blade breakage or  insu   cient  blade tension.
Coolant electric pump.
Blade cleaning brush.

Semiautomatic cutting cycle:
Selection of blade speed.
Press Start / Stop cycle button on the control panel and adjustment of the downfeed speed rate on the hydraulic regulator. Automatic vice lock and material cutting. Automatic return of the sawframe to the initial position and vice opening.

Manual cutting cycle:
Material lock in the vice.
Quick blade approach to the material to cut, selection of blade speed and start by pressing the grip-switch. Manual sawframe pull down to execute the cut. Manual return of the sawframe to the initial position and vice opening.

FEATURES
Sawframe , vice  and  plateau in cast-iron.
Bench and pedestal made of steel plate.
Precision blade guide with tungsten carbide plates and adjustable rollers.
Gear-box in  oil  bath.

STANDARD EQUIPMENT
Adjustable bar stop tod with millimiters scale Material support bracket
Bimetal M42 blade 3310x27x0,9 mm
Set of service spanners
CE  certi  cation and use and maintenance manual

OPTIONAL
Rollerway  loading side (2 mt)
Rollerway  unloading side with bar stop (2mt) Blada lubricant nebulizer
Start cycle pedal