Semiautomatc inverter SUPER TRAD 301 SO PLUS
Semiautomatc inverter SUPER TRAD 301 SO PLUS


255 250 300 x 220
45° R 200 190 190 x 170
45° L 160 160 190 x 100 - 150x170
60° R 110 110 110 x 130


The saw SO PLUS allows to make a complete cutting cycle without the constant presence of the operator through the original hydraulic control system for the descent of the sawframe.
Infinitely variable blade speed through INVERTER from 20 to 105 m/min. Analogic measurement of the starting position of the sawframe and blade tension. Limit switch to set the sawframe return just above the material to cut.
With button for the quick approach to the material to cut.

Centralized control panel in the front of the machine including luminous alarm system. Automation is controlled by safety relay.
High e ciency hydraulic pump and low energy consumption.
Practical and reliable for all cutting needs of small and medium-sized ferrous materials. Large round working table “plateau” which turns with the blade mitering guaranteeing excellent support for the material to cut. This system prevents the blade from cutting theworking table as is the case with the conventional bandsaws.
Massive cast-iron vice with handwheel and quick locking lever. The vice is equipped with a practical handle for rapid movement and is mounted on a rail to allow lateral displacement. Possibility of cuts from 0° to 60° to the right and to 45° to the left.
Blade tension by handwheel and analogical pressure transducer visualized on the display. Automatic stop of the machine in case of blade breakage or insu cent tension of the blade. Coolant electric pump. Blade cleaning brush.

Possibility to switch between automatic cutting mode to manual cutting mode.
Adjustable sawframe downfeed speed controlled by hydraulic regulator.

Touch Screen CONTROLLER with piece-counter, working hours (partial and total count) and self-diagnosis with the following functions:
Counting of cut pieces (programmable piece-counter).
- Counting hours of partial and total work.
- Programmable cutting cycle (customization of the cutting cycle).
- Switching from automatic cutting cycle to manual cutting mode.
- Notification of status and error messages.
- Viewing of motor absorption (with Inverter option).
- Display of the blade rotation speed (with Inverter option).
- Interface Language selection (Italian - English - French - German - Spanish - more on request)

Semi-automatic cutting cycle:
When you start the cutting cycle the saw automatically performs the following functions:
Closing of the vice and start of blade rotation; sawframe downfeed until the completion of the cut; stopping rotation of the blade; sawframe return to the starting position; vice opening.
Manual cutting mode:
Clamping of the material to be cut via switch on the control panel; Start of the blade rotation by a gripswitch on the sawframe and manual pull down until the completion of the cut; stopping of blade rotation to release as soon as the gripswitch is released; vice opening via switch on the control panel.

Sawframe, vice and plateau in cast-iron.
Bench and pedestal made of steel plate.
Precision blade guide with tungsten carbide plates and adjustable rollers.
Gear-box in  oil  bath. 
The electro-hydraulic components are of  first  choice. Tests are performed rigorous testing on assembling mechanical and automation that ensure a high level of performance and functionality.
All Thomas saws are built in accordance with the EC Machinery Directive.

Bar-stop with millimeter scale for measuring the length of cut.
INVERTER for cutting speed from 20 to 105 m/min.
Work support bracket for the material to be cut.
Water gun to clean the working table.
HSS bi-metal blade 2750x27x0,9mm.
Set of service spanners.
Certificate of conformity and instruction manual according to Machinery Directive 2006/42 / EC.

Pneumatic spray micro-mist lubricating oil pump.
Starting pedal.
Roller table loading side 2 meters long (capacity 240 kg).
Roller table unloading side 2 meters long with a bar stop (capacity 240 kg).

Telephone technical support directly from the company.
Service spare parts supply.



3Ph Electric motor






Gearbox reduction ration



Flywheel diameter



Blade dimension


2750 x 27 x 0,9

Cutting speed



Vice opening



Sawframe inclination



Working table height



Machine dimension


900 x 1750 x 1950





© Sthemma S.r.l. - VAT NR IT-03753910243

We use cookies to provide a better experience for users browsing our website. By using the website, you agree to the use of cookies. OK